Just some shots of the sand job in progress
 |
| Board was really discolored form sitting out side , even under cover. |
|
| You can see splits in top layer and pitting. |
 |
| Not bad for about 5 minutes worth of sanding with coarse grit paper. |
 |
| About 20 minutes form start and we have a nice looking board. |
 |
| not to bad for an ol' gal. |
Our saw man has the back edge cut at a 45 degree angle so we will have a nice 90 on the back edge. Had hoped to do the second side of front on table saw but it only goes to a 45 degree angle so it has to be done by hand as well.
The decision to add 2 inches to width for better rudder control w made so we are adding a 2 inch strip to project.
 |
| Time to start the second front edge |
 |
| ready to start taking off wood. |
No comments:
Post a Comment